Metal gates handrails railings

 More basic handrail down steps and across patio level

Finished in red oxide primer and gloss black top coat

Steel Fabrication

This is one of three large sheet steel display trays fabricated for

The National Museum of Wales, Cardiff.

To be used in an exhibition containing works by Andrea Buttner.

They were fabricated from 4mm mild steel.

They also  boasted a high spec Powder Coated finish, comprising of Zinc powder primer and matt finish powder top coat.

Bespoke metal Fabrications

For another commercial customer  we fabricated a wet manifold marine exhaust to convert this Kubota diesel engine for use in their pleasure craft business in Norfolk.

Again constructed from 304gd stainless steel, fully TIG welded and leak tested using dye penetrant.

custom metal work

The bull bars shown were originally of a land cruiser and were shortened and modified to fit the Hilux for a customer.

Again TIG welded.

Also the customer requested a sumpgaurd whih was fabricated from 6mm 5bar aluminium tread plate and finish in matt black. 

rally fabrication

Here are side steps under construction for a JAGO Jeep Kit car.

Constructed from 30mm circular hollow section and formed using our pipe bending facilities.

Once welded the tubes will have mounting brackets fitted.

The tread area will have aluminium tread plate infill.

We are also supplying welded aluminium load area and cockpit floor for this vehicle.

Also spare wheel and jerry can mountings points are being fabricated.

bespoke metal gates handails

 

 A new floor pan, transmission tunnel and load bed were fabricated from 5 bar Aluminium chequer plate and then Tig welded into position.

vehicle modification
aluminium welding

 Hand rails fabricated and installed at a domestic property in the Ebbw Vale area.

Comprising of 3 tiers of rails including steps.

Simple basic design reasonably priced.

Metal handrails

A steel framed extension completed for a commercial client at their facility situated in Caerphilly.

The extension was fitted with sheeting rails and later clad in corrugated sheet.

It included pedestrian and forklift access.   

Sheet Metal Fabrication

This outboard mounting plate was constructed for a private client for his boat conversion.

It is constructed from 304gd Stainless steel, MIG welded.

It also has a hardwood mounting block.

This is supplied complete with fixings, baking plate and in a natural finish.

Race rally fabrication

Again some more handrail for a private customer, this time incorporating a half C scroll on the top rail.

Simple, economical design.

Finished in Gloss Black enamel top coat.

vehicle modification fabrication
Here we have a fabricated oil breather catch tank. Fabricated for a Subaru Impreza.

The tank includes filter mesh, internal baffles, swadged inlets and outlets and a 1/4" BSP drain plug situated on the bottom.

Fully TIG welded and leak tested.

Finish in High temp Gloss paint

Stainless steel construction.

 

bespoke metal fabrication

 Another set of economically priced handrails protecting a patio edge. Comprising of approx 9mtrs of handrail and incorporating two sets of steps. Finished in gloss black. Both welded and bolted construction for easy installation.

Designed specifically to match existing handrails at the property.

This project was quoted, designed, manufactured and installed within 15 working days. 

aluminium fabrication welding

 The door cards and footwells are also fabricated from Aluminium chequer plate and fully welded using our AC Tig.

alloy race fabrication

An Aluminium racing fuel tank is modified for a customer. Filler pipe is moved and old hole plated. Fixing brackets are added to the tank.  

Make a free website with Yola